EC-3000 NOW EVO-310 – The Hill Electric Air Compressor Pump

Hill EVO-310 Electric Air Compressor Key Benefits:

Simply the best PCP air rifle and bottle-filling personal compressor that money can buy. It is built to exacting tolerances and from premium materials.

Built-in an Automatic Air Pressure Purge
This kicks in whenever the motor on the compressor stops, so when it goes into a cooling cycle and when a fill is paused or finished.
This not only takes the strain off the motor when starting again against very high pressures, but has the added benefit of purging the air, including any moisture from inside the unit.
This is very important for people filling larger rifles and or cylinders.

The new unit also benefits from our continuous improvement in R & D, including the new super durable Shuttle Valve, which we made from some quite exotic material.
Users should note that this shuttle valve does give the compressors a unique sound compared to other compressors out there on the market, but they are very efficient, and extremely long-lasting and when you hear that sound you will now instantly that it is a Hill Compressor!

A New built in highly accurate digital pressure sensor with an additional analog gauge, is extremely accurate, but also means that you no longer need to re-calibrate the compressor during a major service.

The EVO can be set as low as 50 bar (755 psi) and up to 310 bar (4500 psi).

The EVO also benefits from completely new electronic architecture along with completely new software, as with all Hill products the electronics have been designed and tested in house by our own software, and electronics engineers, and believe it or not the PCB’s are manufactured here in Sheffield too.

This new EVO-310 is incredibly simple to service and maintain, with tutorial videos available on YouTube.

If you are looking for the ultimate in moisture protection for your gun and compressor you can add The Hill Dry-Pac Pro.

Both our crank and silicone oils have been specifically manufactured and designed for use with the EVO-310 Electric Compressors. No other oils should be used.

The Crank Case Oil (Red) is in the perfect size bottle for the unit as it takes almost the whole bottle to fill the crank properly on the initial fill, and should not need topping up for some time. When filling the crank oil please ensure that it is filled properly, this should require near enough the whole 50ml bottle.

The Silicone Oil (Clear) is used all the time by the pump and should need replacing after approximately 50 hours of run time, this is also the correct point to change the Crank Oil.

** Airgun Charging Cylinders and Tanks over 4 Litres can be filled over a few sessions if allowing the cylinder and the compressor to fully cool to room temperature between filling sessions. Please note that the fill pressure will reduce as the air in the cylinder cools down after filling. This is quite normal, simply top-up the cylinder again once it has fully cooled down.

IMPORTANT SAFETY NOTE:
UNDER NO CIRCUMSTANCES USE THE HILL EVO-310 ELECTRIC AIR COMPRESSOR TO FILL DIVING CYLINDERS, B/A OR SCBA TANKS THAT ARE TO BE USED FOR BREATHING AIR APPLICATIONS.
The Hill EVO-310 Electric Air Compressor is designed to fill Cylinders and Tanks that are being used solely for Air Gun Charging and use.

3000-001 – 220-230v UK Version comes with 3 Pin UK Plug Adaptor

Designed, Manufactured and Assembled by Hill Pumps in the Sheffield, UK, Factory.

Further Features of the EVO-310

• Patented Innovation. CE Certified with Built In Safety.
• Set pressure up to 310 bar, with auto shut-off.
• Fully automated and looks after itself.
• Boxed weight 25kg

Fast fill:

• Pistols approx. 1min Air Rifles approx. 3min from 0 to 250 bar